Restoring a Carpet Covered Terracotta Tiled Floor in Appleton

I was contacted by a home owner in Appleton near Warrington who had a Terracotta tiled floor in their dining Room. The floor had previously been covered in carpet and they were keen to have the whole floor restored.

To complicate things further the Carpet had been stuck down with a strong adhesive and a local builder had advised them to remove the glue using brick acid. Although this was successful it had the side effect of discolouring the grout lines and no amount of rinsing with the floor with water to dilute and wash off the acid would resolve the problem.

Carpet Covered Terracotta Tiled Floor Before Restortion in Appleton

Happy for me to resolve the problem, my client informed me they were going on holiday and would like me to do the work whilst they were away. This was a great idea as it would guard against unwanted foot traffic during the cleaning and sealing process and it would also mean they would have a nice surprise waiting for them on their return.

Deep Cleaning a Terracotta Tiled Kitchen Floor

After protecting the Kitchen units and skirting boards with plastic sheeting my first job was to strip any remaining sealer off the Terracotta tiles using a strong dilution of Tile Doctor Pro-Clean. The solution was spread across the floor and then left to dwell for twenty minutes before scrubbing it in with a black scrubbing pad attached to a rotary floor buffer. I then used a wet vacuum to remove the now dirty cleaning solution from the floor.

The grout was also given a good scrub using more Tile Doctor Pro-Clean but this time it was scrubbed in with a narrow stiff brush until I was satisfied it was as clean as it could be. The floor given a good rinse and I then inspected the floor tile and grout to ensure it was clean and free of sealers, any areas that needed ore work were retreated and the floor given a final rinse and dry with the wet vacuum before being left to dry off fully overnight.

Sealing a Terracotta Tiled Kitchen Floor

I returned the next morning and tested the tiles with a damp meter to ensure they were dry before beginning applying the sealer. All was well, so I started by applying a single coat of Tile Doctor Colour Grow. Colour Grow is an impregnating sealer that seeps into the pores of the tile protecting it from within and enhancing the natural red colour of the Terracotta in the process.

Once the first coat had dried I followed up with two coats of Tile Doctor Seal and Go which is a compatible water-based sealer that works really well on clay tiles and adds a lovely sheen finish to the floor.

The last step was to resolve the problem with the discoloured grout lines by applying a white grout colourant to the grout. This gave the grout a fresh and consistent appearance throughout and also has the benefit of sealing the grout which will protect it from staining and also make it much easier to clean.

Last step was to finish the sealing of the floor by topping up the sealer with another three coats of Seal and Go to ensure the floor was fully sealed.

Carpet Covered Terracotta Tiled Floor Before Restortion in Appleton

The result was a huge improvement and now looked like a recently installed Terracotta floor. When my customer returned from holiday they were more than happy with the floor and the work I had done.
 
 

Restoring a Tired Terracotta Tiled Floor in Cheshire

Polishing Limestone Kitchen Floor Tiles in Helsby

Getting the best out of a natural stone floor isn’t straight forward and we often get calls from customers who have come to the realisation they need help. An example of this being a lady from the village of Helsby who got in touch after her husband had given up following spending two days cleaning their Limestone tiled kitchen floor but actually making it worse.

Limestone Kitchen Floor Tiled Before Cleaning

Burnishing and Cleaning a Limestone Tiled Floor

On arrival the first step was to give the floor a general clean with a focus on cleaning the grout lines and removing any grit from the floor. I used a dilution of Tile Doctor Pro-Clean which is an alkaline tile cleaning product that is safe to use on grout and stone. The cleaning solution was applied by sponge mop and left to soak for ten to twenty minutes before being scrubbed in along the grout line using a stiff narrow brush to get them really clean. Once done the floor was then rinsed with clean water and the now soiled cleaning solution removed with a wet vacuum.

Limestone Kitchen Floor Tiled During Cleaning

The next step was to use a set of Tile Doctor burnishing pads to polish the stone back to a deep shine. The pads which are encrusted with industrial diamonds are applied with a rotary floor buffer in sequence from coarse to extra fine. The first pad has a Coarse 400 grit which is applied with only water for lubrication, removes minor scratches, sealers, and the top surface dirt. Working in small areas, I applied the pad across the Limestone, rinsing in between and picking up the soiled solution with a wet-vac machine. I then repeated this same procedure with the Medium 800 grit pad which is the first stage polishing pad again rinsing with water after use. The next two pads are a Fine 1500 grit and Extra Fine 3,000 grit which really build up a high-quality polish on the stone.

Sealing a Limestone Tiled Floor

The floor was left to dry off fully overnight and I returned the next day to seal the Limestone first checking with a damp meter that the stone was dry. The customer wanted a natural look finish to the Limestone, so to seal the tiles I applied two coasts of Tile Doctor Ultra Seal which is an impregnating sealer doesn’t change the look of the stone in anyway. Ultra Seal is an impregnating sealer that works under the surface by occupying the pores in the stone thus preventing dirt from becoming ingrained.

Limestone Kitchen Floor Tiled After Cleaning Limestone Kitchen Floor Tiled After Cleaning

Once the sealer had dried the floor was treated to a gentle buff with a white pad to bring up the shine even further. Once complete the stone looked a lot healthier and the grout looked much cleaner.
 
 

Professional Limestone Floor Polishing in Cheshire

Polishing Marble Floor Tiles in Willington

Although expensive Marble is a highly coveted, popular and classic flooring choice, not only is it hard wearing you can attain a high polish that simply looks fantastic. At peak condition, it’s one of the most beautiful and eye-catching types of stone available, however it’s appearance will degrade over time and with use, so it does need maintaining.

This customer, who lives in the small village of Willington in Cheshire had contacted us because they were concerned that the lustre on their Marble tiled floor which had been installed throughout much of the ground floor had faded and lost its attractive appearance. We arranged a date to go over and re-polish the floor back to health.

Marble Tiled Floor Before Cleaned and Polished Willington Cheshire

Burnishing and Cleaning a Marble Tiled Floor

On arrival the first step was to give the floor a general clean using a mild dilution of Tile Doctor Pro-Clean which is an alkaline tile cleaning product that is safe to use on Marble. I mention this because there are many cleaning products on the market today which are acidic and really only meant for use on Vinyl and Ceramic tiles. The cleaning solution was applied by sponge mop and left to soak for ten to twenty minutes with a particular focus on the grout lines. I used a stiff brush along the grout lines to get them really clean and then once done the floor was then rinsed with clean water and the now soiled cleaning solution removed with a wet vacuum. This process also has the added advantage of removing any grit from the floor which might cause scratching during the next stage which was to polish the floor.

The next step was to use a set of Tile Doctor burnishing pads to polish the stone back to a deep shine. The pads which are encrusted with industrial diamonds are applied with a rotary floor buffer in sequence from coarse to extra fine. The first pad has a Coarse 400 grit which is applied with only water for lubrication, removes minor scratches, sealers, and the top surface dirt. Working in small areas, I applied the pad across the Marble, rinsing in between and picking up the soiled solution with a wet-vac machine. I then repeated this same procedure with the Medium 800 grit pad which is the first stage polishing pad again rinsing with water after use. The next two pads are a Fine 1500 grit and Extra Fine 3,00 grit which really build up a high-quality polish on the stone.

Sealing a Marble Tiled Floor

The floor was left to dry off fully overnight and I returned the next day to seal the Marble first checking with a damp meter that the stone was dry. To seal the Marble tiles I applied two coasts of Tile Doctor Colour Grow which is an impregnating sealer that works by occupying the pores in the stone thus preventing dirt from becoming ingrained. Colour Grow also has the added advantage of enchasing the natural colours in the stone and in this case brought out the deep brown colours in the Marble.
Once the sealer had dried the floor was treated to a gentle buff with a white pad to bring up the shine even further.

Marble Tiled Floor After Cleaned and Polished Willington Cheshire Marble Tiled Floor After Cleaned and Polished Willington Cheshire

 
 

Professional Marble Tiled Floor Polishing in Willington