Renovating an Encaustic Tiled Hallway in Padgate near Warrington

This floor may look like it’s made from Victorian tiles but if you look closely you will see the floor is actually made of 72 Encaustic tiles each one containing a regular pattern. Encaustic tiles have more in common with Ceramic tiles than Victorian and are actually made using layers of cement where are often hand painted with patterns which and hydraulically pressed into the surface.

Encaustic Tiled Hallway Padgate Before Cleaning Encaustic Tiled Hallway Padgate Before Cleaning

The tiled floor was actually floor found hiding under the hallway carpet by the new owners of the house which is in Padgate near Warrington. Were not sure of the age of the tiles but suspect they may be 100 years old. Certainly, Padgate has many older houses so they could be although it’s mainly known for its large RAF base during the 2nd world war.

Encaustic tiles are porous and so need to be sealed to protect them from dirt becoming ingrained in the floor. However, hallway floors get a lot of foot traffic which over time wears down the sealer until it becomes so thin and patchy it’s no longer effective. As a result, you need to regularly top up the sealer or every three to four years it will need to be stripped off and reapplied.

Deep Cleaning the Encaustic Tiled Floor

You can see from the pictures that the tiles were in good physical shape but had accumulated a lot of dirt which was especially visible near the front door. As I mentioned earlier Encaustic tiles being made from cement and need to be sealed in order to protect them from dirt becoming in trapped in the pores of the tile.

Encaustic Tiled Hallway Padgate Before Cleaning

These tiles would need a deep penetrative clean to extract the dirt, so my first course of action was to apply a strong dilution of Tile Doctor Pro-Clean across the floor and left it to soak into the tiles for ten minutes. Pro-Clean is a very effective alkaline product that’s safe to use on tile, stone and grout and is designed for tile cleaning. It was then worked into the tile using a black scrubbing pad fitted to a floor buffing machine and the soiled cleaning solution extracted off the floor with a wet vacuum.

I then used a set of diamond encrusted burnishing pads to restore the surface or the encaustic tiles starting with the 400 and 800 grit pads and lubricated with a little water. This also dealt with other deposits on the floor left behind from the carpet. I rinsed the floor with water to remove the slurry and then finished the burnishing process by applying the 1500 and 3000 grit pads to really restore the shine to the tiles.

Sealing the Encaustic Tiled Hallway Floor

To seal the floor and grout I applied Tile Doctor colour grow which is an impregnating sealer that enhances colour and soaks into the pores of the encaustic tile to protect it from dirt becoming ingrained into the tile in future. Any sealer not taken up by the pores of the tile is rubbed off afterwards.

Encaustic Tiled Hallway Padgate After Cleaning Encaustic Tiled Hallway Padgate After Cleaning

The transformation was quite remarkable and as you can imagine my customer was over the moon when he returned from work.
 
 

Restoring Encaustic Hallway Floor Tiles in Cheshire

Renovating a Victorian Tiled Hallway in Grappenhall near Warrington

The village of Grappenhall has a long history that goes all the way back to the bronze age and as a result has all periods of architecture including quite a lot of houses with Victorian tiled hallways . This particular floor at a house in the village had been well looked after well by the owner but had now lost its vibrancy, was looking dull and now needed a deep clean and reseal.

Victorian tiles are porous and so need to be sealed to protect them from dirt becoming ingrained in the floor. However, hallway floors get a lot of foot traffic which over time wears down the sealer until it becomes so thin and patchy it’s no longer effective. As a result, you need to regularly top up the sealer or every three to four years it will need to be stripped off and reapplied.

Victorian Tiled Hallway Grapenhall Before Cleaning Victorian Tiled Hallway Grapenhall Before Cleaning

Deep Cleaning the Victorian Tiled Floor

I used clear plastic to protect the wood skirting boards from splashing and then gave the tiles a good scrub with a mixture of Tile Doctor Pro-Clean and Remove and Go to deep clean and strip off any remaining sealers. The cleaning solution was left to soak in for ten minutes before scrubbing it in with a black pad fitted to a heavy buffing machine.

Once the whole area had been scrubbed I rinsed off with water which was then extracted using a wet vacuum. With the floor now clear I was able to inspect it to ensure all the previous sealer and ingrained dirt had been removed. Any areas with stubborn stains were spot treated by reapplying the cleaning concoction I used earlier before leaving the floor to dry off fully overnight.

Sealing the Victorian Tiled Floor

When I returned the next morning my first job was to test the tiles for damp using a damp meter. This is important as damp tiles won’t take the sealer as well as dry tiles, however this time everything was fine.

I then proceeded to seal the Victorian tiles with a single coat of Tile Doctor Colour Grow to enhance the natural colours in the tile before applying a further seven coats of Tile Doctor Seal and Go which leaves a sheen finish and is ideal for Victorian tiles.

Victorian Tiled Hallway Grapenhall After Cleaning Victorian Tiled Hallway Grapenhall After Cleaning

The hallway now looks fantastic and vibrant and then new sealer will protect them from ingrained dirt making them easier to clean and keep them looking good for some time to come.
 
 

Restoring Victorian Hallway Floor Tiles in Cheshire

Unusual Victorian Tiled Hallway Cleaned and Sealed in Grappenhall

Impressed with the details of a similar floor published on our website the owner of this Victorian tiled hallway floor at a house in the village of Grappenhall asked if we could pay her a visit.

The floor was in relatively good physical condition, although there were a few tiles that needed replacing and really just needed cleaning and resealing however I thought it would be worth a mention on my blog due to it being so unusual. There seamed no set pattern to the tiles and it was as if they had some tiles left over and just laid them as they came.

Victorian Tiled Hallway Before Cleaning in Grappenhall

Deep Cleaning the Victorian Tiled Floor

After protecting the skirting boards I gave the floor a deep clean using Tile Doctor Remove and Go to strip off any remaining sealers. This was left to soak in for twenty minutes then scrubbed in using a rotary machine fitted with a black pad then rinsed off with clean water which was then extracted using a wet vacuum. I was careful not to use too much water as the owner had just converted the cellar below into a games room and was worried it may cause damp in the ceiling. There were a few tiles that needed replacing so we fixed and grouted them in before leaving the floor to fully dry off overnight

Sealing the Victorian Tiled Floor

We returned next morning and tested for damp with a damp meter to make sure the floor was ready to seal. Everything was fine so we proceeded to seal the Victorian tiles with a single coat of Tile Doctor Colour Grow to enhance the colour of the floor before applying a further six coats of Seal and Go which is ideal for these type of tile.

Victorian Tiled Hallway After Cleaning in Grappenhall

The customer was made up with the result we had made to her hallway, I only wish I had managed to take better pictures of the floor so you could appreciate it as much as she did.
 
 

Restoring Victorian Hallway Floor Tiles in Cheshire