Impressed with the details of a similar floor published on our website the owner of this Victorian tiled hallway floor at a house in the village of Grappenhall asked if we could pay her a visit.
The floor was in relatively good physical condition, although there were a few tiles that needed replacing and really just needed cleaning and resealing however I thought it would be worth a mention on my blog due to it being so unusual. There seamed no set pattern to the tiles and it was as if they had some tiles left over and just laid them as they came.
Deep Cleaning the Victorian Tiled Floor
After protecting the skirting boards I gave the floor a deep clean using Tile Doctor Remove and Go to strip off any remaining sealers. This was left to soak in for twenty minutes then scrubbed in using a rotary machine fitted with a black pad then rinsed off with clean water which was then extracted using a wet vacuum. I was careful not to use too much water as the owner had just converted the cellar below into a games room and was worried it may cause damp in the ceiling. There were a few tiles that needed replacing so we fixed and grouted them in before leaving the floor to fully dry off overnight
Sealing the Victorian Tiled Floor
We returned next morning and tested for damp with a damp meter to make sure the floor was ready to seal. Everything was fine so we proceeded to seal the Victorian tiles with a single coat of Tile Doctor Colour Grow to enhance the colour of the floor before applying a further six coats of Seal and Go which is ideal for these type of tile.
The customer was made up with the result we had made to her hallway, I only wish I had managed to take better pictures of the floor so you could appreciate it as much as she did.