Buffing

Travertine Kitchen Floor Renovated in Thurstaston Wirral

Polishing Travertine Kitchen Floor Tiles in Thurstaston

Although the Travertine tiles in this beautiful kitchen floor in Thurstaston were in fair condition the Grout had turned black with dirt. This normally happens when the stone is sealed but the grout has been left unprotected, then when cleaning the floor dirt is washed off the stone into the grout line where it gets trapped in the rough surface of the grout. Overtime the dirt builds up and the grout lines turning it black and completely changing the appearance of the floor.

Travertine Kitchen Floor Before Renovation Thurstaston Wirral

After visiting the property, I could see the polished appearance of the Travertine had faded and the sealer was wearing thin, so I recommend not only cleaning the grout but also burnishing the stone to deep clean it and restore its polished appearance.

Burnishing and Cleaning a Travertine Kitchen Floor

To get the best from a stone floor, we apply a set of Diamond encrusted burnishing pads of different grades starting with a coarse 400 grit pad run over the tiles using a strong dilution of Tile Doctor Pro-Clean. Once the pad had been run over each tile at least three times attention was turned to the grout lines which was scrubbed with more Pro-Clean and a stiff brush. Afterwards the floor is rinsed down with water and then the dirty residue is extracted with a wet vacuum.

The 400-grit pad was followed by the application of a medium 800-grit pad using only water this time to add lubrication. Again the floor is rinsed with water after use and the soiling extracted with the wet vacuum. The next two pads are a Fine 1500 grit and Extra Fine 3,000 grit which really build up a high-quality polish on the stone. Before applying the 3000-grit I spent some time filling in the larger pits (holes) in the Travertine with an epoxy filler. Travertine is notorious for having this problem and being an acid sensitive stone it very important not to use even a mildly acidic cleaning product as this can make the problem worse.

Sealing a Travertine Tiled Floor

The floor was left to dry off fully overnight and I returned the next day to seal the Travertine first checking with a damp meter that the stone was dry. The customer wanted a natural look finish to the Travertine, so to seal the tiles I applied two coasts of Tile Doctor Ultra Seal which is an impregnating sealer doesn’t change the look of the stone in anyway. Ultra-Seal is an impregnating sealer that works under the surface by occupying the pores in the stone thus preventing dirt from becoming ingrained there.

Travertine Kitchen Floor After Renovation Thurstaston Wirral

Once the sealer had dried the floor was treated to a gentle buff with a white pad to bring up the shine even further. Once complete the stone looked a lot healthier and the grout looked so much cleaner.

 

Professional Travertine Floor Polishing in Cheshire

Polishing Travertine Kitchen Floor Tiles in Thurstaston Read More »

Polishing Limestone Kitchen Floor Tiles in Helsby

Getting the best out of a natural stone floor isn’t straight forward and we often get calls from customers who have come to the realisation they need help. An example of this being a lady from the village of Helsby who got in touch after her husband had given up following spending two days cleaning their Limestone tiled kitchen floor but actually making it worse.

Limestone Kitchen Floor Tiled Before Cleaning

Burnishing and Cleaning a Limestone Tiled Floor

On arrival the first step was to give the floor a general clean with a focus on cleaning the grout lines and removing any grit from the floor. I used a dilution of Tile Doctor Pro-Clean which is an alkaline tile cleaning product that is safe to use on grout and stone. The cleaning solution was applied by sponge mop and left to soak for ten to twenty minutes before being scrubbed in along the grout line using a stiff narrow brush to get them really clean. Once done the floor was then rinsed with clean water and the now soiled cleaning solution removed with a wet vacuum.

Limestone Kitchen Floor Tiled During Cleaning

The next step was to use a set of Tile Doctor burnishing pads to polish the stone back to a deep shine. The pads which are encrusted with industrial diamonds are applied with a rotary floor buffer in sequence from coarse to extra fine. The first pad has a Coarse 400 grit which is applied with only water for lubrication, removes minor scratches, sealers, and the top surface dirt. Working in small areas, I applied the pad across the Limestone, rinsing in between and picking up the soiled solution with a wet-vac machine. I then repeated this same procedure with the Medium 800 grit pad which is the first stage polishing pad again rinsing with water after use. The next two pads are a Fine 1500 grit and Extra Fine 3,000 grit which really build up a high-quality polish on the stone.

Sealing a Limestone Tiled Floor

The floor was left to dry off fully overnight and I returned the next day to seal the Limestone first checking with a damp meter that the stone was dry. The customer wanted a natural look finish to the Limestone, so to seal the tiles I applied two coasts of Tile Doctor Ultra Seal which is an impregnating sealer doesn’t change the look of the stone in anyway. Ultra Seal is an impregnating sealer that works under the surface by occupying the pores in the stone thus preventing dirt from becoming ingrained.

Limestone Kitchen Floor Tiled After Cleaning Limestone Kitchen Floor Tiled After Cleaning

Once the sealer had dried the floor was treated to a gentle buff with a white pad to bring up the shine even further. Once complete the stone looked a lot healthier and the grout looked much cleaner.
 
 

Professional Limestone Floor Polishing in Cheshire

Polishing Limestone Kitchen Floor Tiles in Helsby Read More »

Polishing Marble Floor Tiles in Willington

Although expensive Marble is a highly coveted, popular and classic flooring choice, not only is it hard wearing you can attain a high polish that simply looks fantastic. At peak condition, it’s one of the most beautiful and eye-catching types of stone available, however it’s appearance will degrade over time and with use, so it does need maintaining.

This customer, who lives in the small village of Willington in Cheshire had contacted us because they were concerned that the lustre on their Marble tiled floor which had been installed throughout much of the ground floor had faded and lost its attractive appearance. We arranged a date to go over and re-polish the floor back to health.

Marble Tiled Floor Before Cleaned and Polished Willington Cheshire

Burnishing and Cleaning a Marble Tiled Floor

On arrival the first step was to give the floor a general clean using a mild dilution of Tile Doctor Pro-Clean which is an alkaline tile cleaning product that is safe to use on Marble. I mention this because there are many cleaning products on the market today which are acidic and really only meant for use on Vinyl and Ceramic tiles. The cleaning solution was applied by sponge mop and left to soak for ten to twenty minutes with a particular focus on the grout lines. I used a stiff brush along the grout lines to get them really clean and then once done the floor was then rinsed with clean water and the now soiled cleaning solution removed with a wet vacuum. This process also has the added advantage of removing any grit from the floor which might cause scratching during the next stage which was to polish the floor.

The next step was to use a set of Tile Doctor burnishing pads to polish the stone back to a deep shine. The pads which are encrusted with industrial diamonds are applied with a rotary floor buffer in sequence from coarse to extra fine. The first pad has a Coarse 400 grit which is applied with only water for lubrication, removes minor scratches, sealers, and the top surface dirt. Working in small areas, I applied the pad across the Marble, rinsing in between and picking up the soiled solution with a wet-vac machine. I then repeated this same procedure with the Medium 800 grit pad which is the first stage polishing pad again rinsing with water after use. The next two pads are a Fine 1500 grit and Extra Fine 3,00 grit which really build up a high-quality polish on the stone.

Sealing a Marble Tiled Floor

The floor was left to dry off fully overnight and I returned the next day to seal the Marble first checking with a damp meter that the stone was dry. To seal the Marble tiles I applied two coasts of Tile Doctor Colour Grow which is an impregnating sealer that works by occupying the pores in the stone thus preventing dirt from becoming ingrained. Colour Grow also has the added advantage of enchasing the natural colours in the stone and in this case brought out the deep brown colours in the Marble.
Once the sealer had dried the floor was treated to a gentle buff with a white pad to bring up the shine even further.

Marble Tiled Floor After Cleaned and Polished Willington Cheshire Marble Tiled Floor After Cleaned and Polished Willington Cheshire

 
 

Professional Marble Tiled Floor Polishing in Willington

Polishing Marble Floor Tiles in Willington Read More »

Scroll to Top