Helsby

We received an enquiry from the rural village of Alvanley near Helsby asking if we could remove scratches and etching from a Marble tiled hallway floor. Natural materials like Marble are very hard wearing but can become scratched especially in busy areas like hallways. The good news however is those scratches can be removed and Tile Doctor have developed numerous products and solutions to help with that.

Happy to assist I reassured the owner of the property that the issue could be resolved and organised a date to pop round to survey the floor and conduct a test to work out the best way forward.

The property was quite large and had a very impressive hallway, the Marble tiles still reflected the light and apart from some light scratches were generally in very good condition.

After discussing the floor, I ran a demonstration to burnish a small part of the floor using a set of six-inch Tile Doctor Burnishing Pads. These pads run from coarse to extra fine and work wonders on polished stone removing scratched and making a visible difference to the polished appearance of the Marble.

Happy with the test I was asked to quote for cleaning and burnishing the whole floor to a deep shine and then sealing. I email over a quote later that day which was accepted and a date set for my return.

Removing Scratches and Polishing a Marble Tiled Hallway Floor

Our first job was to wash the floor and grout lines with Tile Doctor Pro-Clean; I find scrubbing the grout by hand with a stiff brush to work in the cleaning solution is the most effective way. Once done the floor was rinsed with water and the soiling extracted with a wet vacuum.

The next step was to start burnishing the Marble using a 17-inch set of four diamond encrusted pads of increasing grits. These pads are run over the floor using a weighted buffing machine to increase traction and contact with the stone. The first two pads as 400 and 800-grit and are used with a little water to remove the scratches, etching and generally clean the stone. After each pad the dirty residue was removed with the wet vacuum and the floor rinsed with water. The process was then repeated using a finer 1500 grit pad which started to put the shine back onto the Marble tiles and after being run over each tile several times the floor was rinsed and extracted again.

Sealing a Marble Tiled Entrance Hall Floor

The floor was left to dry out overnight and work resumed the next morning to polish the floor using the last of the four burnishing pads which is a very fine 3500-grit. This last pad is applied dry with just a spray of water to create a high gloss finish.

Next step was to seal the Marble to protect it from ingrained dirt and staining. This was done using Tile Doctor Ultra-Seal which is a clear impregnator that works by soaking into the stone occupying the pores and ensuring dirt remains on the surface.

To give the floor the deeper shine the owner wanted a final product called Tile Doctor Shine Powder was applied. A tablespoon of shine powder is dissolved into a little water to make a paste and this is then worked into the Marble using a white buffing pad.

After another rinse and extraction with the wet vacuum the last step was to further buff the floor with a white pad to bring up the deep shine. The finish was very impressive and the owner was very pleased with the improvement int the floor. For aftercare I recommended they use Stone Soap as its designed for the regular cleaning of sealed and polished stone, as well as cleaning it also helps build the patina.

 

Professional Restoration of a Mable Tiled Hallway in West Cheshire