tile cleaning Archives - West Cheshire Tile Doctor

Minton Hollins Victorian Floor Renovation Chester

Historically Important Victorian Hallway Floor Restored in Handbridge Chester

I was first asked to restore the large Victorian tiled hallway floor at this mansion type property in Handbridge, Cheshire two years ago. The floors had a lot of history and had been used as a template for the famous Minton Hollins encaustic tiled floor at St George’s Hall in Liverpool that was built in 1854. Unfortunately, however my work was put on hold as other restoration works including repairing dry rot took priority.

Victorian Tiled Floor Before Renovation Handbridge Cheshire

I kept in touch with the owners whilst the other works progressed and kept a look out for 22 beige Octagon shaped tiles that were needed to replace some of the damaged tiles in the floor. In fact, it wasn’t until later in 2023 that I was called back to start the renovation work to the floor, by which time I had managed to source all the replacement tiles needed.

Handbridge is a district of Chester with a mixture of large Victorian mansion type properties on the South bank of the river Dee and workers cottages built to service the water powered factories that sprung up along the river.

Repairing and Cleaning a Victorian Hallway Tiles

Before starting the cleaning process my first task was to replace all the broken tiles. This needs to be done carefully so as not to dislodge any adjacent tiles and make more work for myself. Once removed the base is cleared of old cement and then the replacement tiles fitted using rapid set adhesive and cut to size where required.

Once the repairs were complete and the adhesive set, I began the cleaning process which is designed to remove and remaining protective sealer and flush out ingrained dirt from the pores of the tile. This is done by applying a strong dilution of Tile Doctor Pro-Clean with a mop and then leaving it to soak into the tile for ten minutes. The floor was then scrubbed using a buffing machine fitted with a black pad and lubricated with water. The cleaning alkaline cleaning solution soon turns black with the dirt and then floor is then rinsed with water and the residue extracted with a wet vacuum.

Attention then turned to the decorative historical piece of flooring at the entrance to the hallway. This only needed to be cleaned with Tile Doctor Neutral Tile Cleaner which is used for regular cleaning and maintenance of tiled floors. this was applied with a two-minute dwell time before cleaning by hand using soft scrubbing brush then wiped down with damp microfiber cloths then left to dry.

Sealing a Victorian Tiled Hallway Floor

The next day damp meter readings were taken from both floors to make sure they had dried and were ready to be sealed. The readings were within tolerance so work could begin on applying the first of what would be three coats of sealer.

Tile Doctor Colour Grow was chosen to seal the tiles, it’s an impregnating colour intensifier sealer which is fully breathable so it will allow for moisture to rise through tile, an important consideration for old floors that don’t have a damp proof membrane.

The sealer was applied using a paint pad and any excess is wiped off after five minutes with microfiber cloths before leaving it to dry for twenty minutes. I use air blowers around the floor to increase the drying speed.

Victorian Tiled Floor After Renovation Handbridge Cheshire

The owner of the property was over the moon with the work and pleased that the work to restore the property to its former condition was nearing completion after what had been four years of restoration.

Victorian Tiled Floor Before Renovation Handbridge Cheshire

Professional Restoration of a Victorian Tiled Hallway in West Cheshire

Historically Important Victorian Hallway Floor Restored in Handbridge Chester Read More »

Cleaning an Old Terracotta Tiled Kitchen Floor in Runcorn

1 Comment / Runcorn Tile Cleaning, Terracotta Tile Cleaning, Work History / Alastair Robb

This post comes from a job I did for a customer in who lives in the town of Runcorn on the south bank of the River Mersey. The request was to restore the Terracotta floor tiles in the kitchen of a property which dated back to 1773 and still had all its original features inside and out. You can see from the photograph below that the tile and grout were looking very dull and well overdue a deep clean and seal.

Old Terracotta Kitchen Floor Before Cleaning Runcorn

Deep Cleaning a Terracotta Tiled Kitchen Floor

To clean the floor, I soaked the floor in a strong dilution of Tile Doctor Remove and Go which is a strong stripping and cleaning solution which removes sealers and also draws out ingrained stains and also the heavy grease build up that was present around the cooker.

After twenty to thirty minutes the solution was worked into the tiles using a black scrubbing pad fitted to a rotary machine. The soiled solution was then removed with a wet vacuum and this was followed by scrubbing the grout lines with more Remove and Go and a grout brush until they were clean. The whole floor was then rinsed with water to remove any soil and trace of cleaning product. The water was then extracted using the wet vacuum. The floor was then checked to make sure it was as clean as it could be and stubborn areas spot treated.

Once I was happy the floor was clean it became apparent that some of the grout was loose and would need replacing so I took care of that using a matching grout before calling it a day and leaving the floor to dry out overnight.

Sealing a Terracotta Tiled Kitchen Floor

We returned next morning and tested the tiles with a damp meter making sure it was dry before we could seal it. To seal the floor, I used Tile Doctor Seal and Go which adds a nice sheen to the tiles and works really well on Terracotta.

Old Terracotta Kitchen Floor After Cleaning Runcorn

I took some time to complete though as due to the porosity of the clay it required eight coats to fully seal the tiles. You have to wait between coats to allow them to dry however I was able to speed up the drying process though using an air blower.

Restoring an Old Terracotta Tiled Kitchen Floor in Cheshire

Cleaning an Old Terracotta Tiled Kitchen Floor in Runcorn Read More »

Restoring Life to Victorian Hallway Tiles in Warrington

1 Comment / Victorian Tile Cleaning, Warrington Tile Cleaning, Work History / Alastair Robb

Victorian tiles are a product of the gothic revival that occurred during the reign of Queen Victoria, these tiles are typically colourful and patterned, taking influence from medieval designs. Many property owners in the 21st century understand the value original features such as these floors can have and have chosen to maintain these original tiles.

Restoring them however isn’t always an easy process and we often get asked to deep clean and seal these floors including the example below of a Victorian tiled hallway in the hallway of a grand house in Warrington where the old sealer had gradually worn off allowing the tiles beneath to become dirty and discoloured.

Warrington is an area in Cheshire that expanded and urbanised during the Industrial Revolution period of the 18th and 19th centuries, with its major industries including steel and textiles. This coincided with the growing prosperity of the town, and as people grew wealthier they were able to build fantastic houses with equally fantastic Victorian tiled floors.

Cleaning a Dirty Victorian Tiled Hallway

To begin the restoration, I applied a strong dilution of Tile Doctor Pro-Clean, which is a high alkaline product, to both remove ingrained dirt and strip away any remaining old sealer that was still present on the tiles. It’s important to strip the floor of all old coatings and sealers to ensure optimum performance by the new sealer and also to avoid patchy results. The product was left to dwell on the floor for twenty minutes to break down the sealer and seep into the pores of the stone. I then scrubbed the tiles with a black pad and rotary machine to work the Pro-Clean deep into the tile.

Victorian Tiled Floor Before Cleaning Warrington

The resulting soiled cleaning solution was then removed using a wet vacuum machine and the floor was rinsed with water. There were a few stubborn areas that needed further work so these were spot treated using the same process and then followed this by neutralising anytrace of cleaning product on the tiles with a thorough rinse of water. I dried the tiles with the wet-vacuum once more before leaving them to dry out over the course of two days.

Sealing a Victorian Tiled Hallway

Upon my return to the property I sealed the Victorian tiles using a combination of sealers which we have found is the most effective method of sealing Victorian tiles. Firstly, I applied a single coat of Tile Doctor Colour Grow, which is a colour intensifying impregnating sealer that soaks into the tile and really lifts the colourful the Victorian designs. Secondly, I applied four coats of Tile Doctor Seal and Go, which provides a durable low-sheen finish (as requested by the customer) and will protect against dirt and stains.

Victorian Tiled Floor After Cleaning Warrington

The customer was over the moon with the finished result. We love restoring these
original Victorian tiles because the transformations are truly in incredible. It’s easy to see why so many people want to have them maintained because they really add character to any property.

Cheshire Victorian Tiled Hallway Restoration

Restoring Life to Victorian Hallway Tiles in Warrington Read More »

Kitchen Tiles Transformed by Grout Recolouring in Stockton Heath

1 Comment / Appleton Tile Cleaning, Work History / Alastair Robb

You often see some fantastic tiled surfaces transformations in lifestyle and home decoration magazines. This customer, who lives in Stockton Heath, had recently seen a feature in which an area of white kitchen tiles had been transformed by changing the white grout to a charcoal coloured grout, giving it a new and particularly striking appearance.

Grout before recolouring at Stockton Heath kitchen

Very impressed with the result, she wanted to know if Tile Doctor could do the same for her white kitchen tiles, which covered the majority of the room. I told her that not only could we do it – we could do it even better in the space of a day!

Here’s how we did it.

Cleaning and Recolouring White Kitchen Tiles

Our process for recolouring grout involves an application of a pre-treatment cleaner to ensure a complete refresh of both the grout and tiles. This pre-treatment cleaner removes any dirt and stains, as well as prepares the the grout joints for a superior bond with the Grout Colourant. I applied this carefully and scrubbed it in using a specialised grout brush, before drying the area with a heat gun.

It was then time to apply Charcoal Gray Grout Colourant, one of the options from our range of 10 Grout Colourants that includes Black, Ivory, and Cappuccino. Our Grout Colourant is an easy-to-use waterborne epoxy that not only recolours grout joints, but also seals and rejuvenates them to guarantee their long-term protection. This was applied using a good old fashioned toothbrush, and any excess was swiftly removed.

Grout during recolouring at Stockton Heath kitchen

To complete the process I removed the old silicone around the windows and worktops and replaced with a fresh batch. When the customer saw the finished result she was over the moon. She thought this kind of transformation could only be made with difficulty and at a high cost but we showed that it’s a very simple and cost-effective process for any home owner.

Grout after recolouring at Stockton Heath kitchen

Professional Kitchen Tile Cleaning and Grout Recolouring in Stockton Heath

Kitchen Tiles Transformed by Grout Recolouring in Stockton Heath Read More »

Shower Cubicle Tile and Grout Refreshed in Sale

1 Comment / Ceramic Tile Cleaning, Warrington Tile Cleaning, Work History / Alastair Robb

It’s not unusual for Shower tile and grout to become stained due to the dyes that are found in soap, mould can also be a common problem but usually this is down to inadequate ventilation. Whilst we do sell products that can keep your tile and grout clean we are also able to assist when a really deep clean is required. The photographs below are a great example of this and are of one of three shower cubicles we were asked to clean and restore at a modernised Victorian property in Sale, Cheshire.

Shower cubicle before cleaning in sale Cheshire

Cleaning Ceramic Tile and Grout

We started by spraying the tile and grout down with Tile Doctor Pro-Clean which is a strong alkaline cleaner, spraying it on mixes it air which helps it to stick to Vertical surfaces allowing it to get to work on the dirt. We left it to dwell for ten minutes before scrubbing it in by hand using a stiff grout brush; this process certainly improved the grout but unfortunately it had become too badly stained to be satisfactory so we decided to recolour the grout using a white grout colourant.

To get the wall tiles and shower glass clean we sprayed on Tile Doctor Oxy-Pro, again leaving it to dwell for a while before gently scrubbing it away with water. Once dry we set about stripping off the silicone strip around the base of the shower wall which was stained and impossible to get clean again.

Recolouring Grout

The grout colourant comes in a tube and is very straightforward to apply although I must admit the work is quite tedious. Two coats of white colourant were required to get the uniform appearance needed and I think you will agree the effect is quite transforming. The other advantage of these particular colourant products is that they are epoxy based and form a barrier of the grout preventing future staining and making it very easy to clean going forward.

The last step was to apply new silicone along the base of the cubicle and give the tiles a quick buff.

Shower cubicle after cleaning in sale Cheshire

I think you will agree it was quite a transformation and the cubicle now looks like it was recently installed.

Restoring the Appearance of Shower Cubicles in Cheshire

Shower Cubicle Tile and Grout Refreshed in Sale Read More »

Full Restoration Of A Victorian Tiled Hallway In Warrington

1 Comment / Victorian Tile Cleaning, Warrington Tile Cleaning, Work History / Alastair Robb

Victorian tiles have a classic aura about them. They have been in use for over 150 years but have never really gone out of style due to their unique style and variety of patterns. As such, we often encounter both Victorian tiles that are very old, and Victorian tiles are quite new. Time, however, can certainly expose the tiles to all manner of wear and tear, and regular professional maintenance will always be necessary to keep them looking good.

As you can see from the photographs below, this particularly old Victorian tiled hallway at a house in Warrington was in pretty bad shape, with missing and cracked tiles. Not to mention that it clearly hadn’t been treated to a deep clean and fresh seal in a very long time. The property owner contacted me to set the situation right.

Victorian tiled hallway before restoration Warrington

Repairing and Cleaning Dirty and Damaged Victorian Tiles

Before I could begin with the restoration, it was necessary to order and reinstall replacements for the missing tiles. Fortunately, Tile Doctor maintains a list of suppliers that we can go to for these. Loose tiles were also refixed and grouted, before being left to dry over night. The result was an almost entirely rebuilt floor of original and replacement Victorian tiles.

Victorian tiled hallway during restoration Warrington

The next day I started the restoration by using a hand help flex machine fitted with three-inch diamond encrusted discs to lightly grind out the scratches in some of the original tiles. This was followed by a deep cleaning of the floor with Tile Doctor Pro Clean in combination with a black buffing pad. I repeated the process multiple times with this reliable alkaline cleaner to ensure all tiles were thoroughly and consistently clean.

The last step in the cleaning process was to rinse the floor thoroughly to remove any trace of chemicals, before soaking up any excess moisture using a wet vacuum. I gave the floor another night to dry fully, as it could only be sealed when I was sure all moisture had disappeared.

Sealing Victorian Tiles

On the third and final day of work, I started by checking the tiles were completely dry. This is essential because even a small amount of moisture can cloud the sealer and prevent it from performing correctly.

When satisfied with the state of the floor, I proceeded to seal it with a combination of six coats Tile Doctor Seal and Go and one coat of Tile Doctor Colour Grow. Seal and Go is a topical sealer that provides a durable layer of protection on the surface of tiles, plus a high-quality sheen finish. Colour Grow, by comparison, is an impregnating sealer, meaning it penetrates into the pores of the stone to act as a barrier against ingrained dirt and stains. It also enhances the range of different colours in the tiles.

Victorian tiled hallway after restoration Warrington

As you can see from the last photographs, this combination of cleaning and two sets of sealer worked wonders to restore the character to the old tiles. My customer was over the moon.

Professional Victorian Tiled Hallway Restoration in Cheshire

Full Restoration Of A Victorian Tiled Hallway In Warrington Read More »

Bringing Life Back to Encaustic Cement Tiles in Chester

1 Comment / Chester Tile Cleaning, Encaustic Cement Tile Cleaning, Work History / Alastair Robb

This very old Encaustic tiled flooring was uncovered at a property in Chester when the present owners started to undertake renovation. They removed the carpets and vinyl tiles from the hallway, revealing the Encaustic tiles to find that they were in truly horrific condition. This included being covered by heavy dirt, dust and, in some parts, by a sticky black bitumen.

Encaustic tiles are made out of compressed cement, and were commonly used in properties built during the Edwardian and Victorian period. This gives us a good idea of just how old these tiles are – but the owners were keen to see what Tile Doctor could do to restore their condition.

Encaustic tiled hallway before restoration in Chester

Cleaning Extremely Dirty Encaustic Cement Tiles

The black bitumen was my main concern when it came to cleaning the tiles. To remove this, along with all the other dirt and dust, our powerful cleaner for heavy soil buildup, known as Tile Doctor Remove and Go, was applied.

The product, which is also effective for removing adhesive and paint stains, was worked into the tiles then left to dwell for thirty minutes, before being scrubbed with a black pad fitted to a rotary machine. The resulting cleaning residue was soaked up with a wet vac machine. This cleaning process was repeated once more over to get the tiles as clean as possible, before leaving them to dry overnight.

Sealing Encaustic Cement Tiles

The next day, damp readings were taken to make sure the floor was dry enough to seal. It’s essential to take damp readings before sealing – especially with old tiled floors that may not have a damp proof membrane installed – as even the slightest amount of excess moisture can damage the performance of the sealer.

Two types of sealer were used in this situation. First to be applied was a single coat of Tile Doctor Colour Grow, an impregnating, colour intensifying sealer which enhances the best shades in the tiles. Following this, four coats of Tile Doctor Seal and Go were applied. This is a topical sealer, which means it builds a layer of protection on the surface of the floor, while also providing an aesthetically pleasing low-sheen finish.

The customer was over the moon at the end result. At first the floor looked to be with a lost cause, but with the right cleaning methods and products it has been a restored to a standard where it almost appears new. Another satisfied customer!

Encaustic tiled hallway after restoration in Chester

Professional Restoration of an Old Encaustic Cement Floor in Cheshire

Bringing Life Back to Encaustic Cement Tiles in Chester Read More »

Ceramic Kitchen Tiles Refresh and Grout Recolouring in Warrington

1 Comment / Ceramic Tile Cleaning, Grout Cleaning, Warrington Tile Cleaning, Work History / Alastair Robb

It can be amazing and equally frustrating just how quickly grout can become dirty and discoloured. I was recently contacted by a couple in Warrington to see if I could help them with their Ceramic tiled kitchen floor that had only been laid six months earlier. To their dismay, in that short time the grout had become discoloured and difficult to clean. They had given up trying to resolve the situation by themselves and so turned to Tile Doctor for some professional assistance.

Naturally I was happy to assist and so arranged to visit the property to conduct a small cleaning test where I demonstrated how with a combination of the right tools and products I could indeed get the grout lines clean again. Seeing the results of the test, the couple were more than happy to book me to complete the job.

Kitchen tiles before cleaning and grout recolour in Warrington

Grout Cleaning for Dirty Ceramic Tiles

On my return to the property, I repeated the same successful test clean across the entirety of the floor. This involved the application firstly of Tile Doctor Remove and Go, which is a strong cleaner, stripper and degreaser. I scrubbed the product thoroughly into all the grout lines, making sure I did not miss any dirt and stains.

I then started to clean the Ceramic floor tiles using our high alkaline cleaner, Tile Doctor Pro Clean. This was scrubbed into the floor in a similar fashion to the Remove and Go and then rinsed off with plain water extracting the waste water with a Wet Vat. The floor was left to dry over lunchtime.

Recolouring Grout for Ceramic Tiles

In the afternoon, I explained that whilst I could get the grout clean it was only a matter of time before it became dirty again. So, to provide a permanent solution I recommended to the customer that we apply an epoxy Grout Colourant, which adds a protective barrier over the grout. An alternative would have been to apply a Grout Sealer however this is best applied to new grout and in this case would not have guaranteed the uniform appearance required.

Before applying the Grout Colourant, I made sure the grout lines were dry by giving them a quick blast with a heat gun. I then started to colour the grout lines with our White Grout Colourant, which is part of a range made by Tile Doctor and is available in ten popular colours, including Black, Charcoal Grey and even Cappuccino Brown.

The difference made to the floor was quite remarkable. Not only is the grout now a uniform brilliant white, but it should remain so for a long time to come. You can see this yourself in the photograph below!

Kitchen tiles after cleaning and grout recolour in Warrington

Restoring the Appearance of Grout on a Ceramic Tiled Kitchen Floor in Cheshire

Ceramic Kitchen Tiles Refresh and Grout Recolouring in Warrington Read More »

Recently Uncovered Victorian Tiles Completely Transformed in Lymm

1 Comment / Victorian Tile Cleaning, Warrington Tile Cleaning, Work History / Alastair Robb

When you uncover a tiled floor after it has been covered by carpet for many years, it’s almost a given that it will be in a bad state. However, my customer, who lives in the town of Lymm, wasn’t expecting the Victorian tiled hallway they had recently uncovered to be in quite so terrible a state. As you can see from the photograph, it has been completely devastated by paint plaster and a big pool of cement floor leveller. Understandably, the formerly colourful appearance of the tiles had completely drained and it would require a through restoration to get them back into a usable condition.

Victorian Floor Uncovered Before in Lymm

Cleaning a Victorian Tiled Floor

To begin the restoration, I mixed a strong cleaning solution which consisted of Tile Doctor Remove & Go combined 50/50 with Tile Doctor Pro Clean. Remove & Go is a heavy duty remover that breaks down old sealers, along with adhesives, paint stains and other tough soil build up where as Pro-Clean is a versatile alkaline-based cleaner that reliably eradicates dirt on a wide variety of natural stone floors.

The solution was applied liberally across the floor, and left to dwell for a short period, allowing time for it to soften up the paint plaster. Next, I fitted a coarse scrubbing pad to my rotary cleaning machine and began to scrub the solution into the tiles, with a big difference to the appearance of the tiles being made quite quickly. The resulting cleaning slurry was promptly removed using a wet-vac machine.

I repeated the process two times to provide an extra thorough clean and then give the floor a thorough rinse. Some particularly stubborn marks remained on the floor which I was able to remove using Tile a Doctor Acid Gel, a blend of phosphoric and hydrochloric acids in gel form that’s easy to control. The floor was then left to dry fully overnight.

Sealing a Victorian Tiled Floor

The next morning, I returned to the property and ran some damp tests. This is incredibly important to do before sealing any tiled floor because any excess moisture can cloud the sealer and prevent it from doing its job properly.

Once satisfied that the floor could be sealed, I applied several coats of Tile Doctor Seal and Go, our topical sealer which provides both a robust surface seal and a long-lasting low sheen finish in one and ideal for Victorian tiles.

It would be an understatement to say that this Victorian tiled floor was transformed. The customer was amazed at the results considering how bad a state the tiles had been in just a day earlier. When you have a situation like this, it’s hard to believe the tiles could ever be fully restored. Nonetheless, we could now see them in their full and original glory, and needless to say, the customer was very, very pleased with the result.

Professional Victorian Tiled Floor Restoration in Lymm

Recently Uncovered Victorian Tiles Completely Transformed in Lymm Read More »

Grout Colouring and Cleaning for Quarry Tiles in Appleton

1 Comment / Appleton Tile Cleaning, Quarry Tile Cleaning, Work History / Alastair Robb

It’s always a good idea to double-check any tile cleaning advice you receive with a professional. Sometimes advice can be inaccurate and cause more problems than good. Such was the case with this customer, who lives in the small town of Appleton near Warrington. He had been advised by his builder to use brick acid to remove carpet glue from a newly discovered Quarry tiled floor. Taking the advice, he had washed the floor several times with a solution of brick acid diluted with water. But while this seemed to successfully remove the carpet glue, it also severely discoloured the grout lines, leaving the entire floor looking grubby and unappealing.

The customer was just about to go on holiday, and asked me to see what could be done to restore the floor’s appearance while he was gone. With the house to myself, I got to work.

Quarry Tiles Before Cleaning in Appleton

Cleaning a Stained Quarry Tiled Floor

My first job was to strip the floor property to remove old sealers present on the tile using a strong dilution of our high alkaline cleaner, Tile Doctor Pro Clean. We use this cleaner on all types of tile and natural stone due to its versatility and consistency.

I spread the solution onto the floor and left to dwell for twenty minutes before scrubbing with a black pad fitted to a floor rotary machine. This process also removed the years of dirt and dust that had penetrated through the recently removed carpet. I also paid attention to the grout lines giving them a good scrub with a stiff grout brush, but the acid staining proved to be impossible to remove completely.

While I’m not sure exactly how long the floor had been covered by carpet, it’s safe to say a deep clean had been long, long overdue. Once I had cleaned the floor to a high standard, I used a wet-vac to remove the now dirty cleaning solution from the floor, before leaving it to dry off completely overnight.

Sealing a Quarry Tiled Floor

Upon my return to the property the next day, I tested to make sure the floor was dry enough to seal, which is important as excess moisture can cloud the sealer and damage its performance.

Once satisfied, I applied one coat of Tile Doctor Colour Grow, which is our impregnating sealer designed to really bring out the natural colours in the tile, followed by two coats of Tile Doctor Seal and Go to give the tiles a stain resistant, low-sheen finish.

After this was dry I coloured the grout lines with a matching Tile Doctor Grout Colourant to cover and hide the damage the acid had caused to the grout lines. Finally, I gave the floor three more coats of Seal and Go to add the finishing touches.

My customer returned from holiday to find a completely transformed floor. Looking at the before and after photos, it is easy to see why he was more than happy with the result! Another satisfied customer.

Restoration of Quarry Tiles in Appleton

Grout Colouring and Cleaning for Quarry Tiles in Appleton Read More »