tile sealing

Victorian Hallway Renovation Chester City Centre

Victorian Tiled Hallway Floor Cleaned, Repaired and Sealed in Chester

We first renovated this Victorian hallway floor in Chester City Centre four years ago but at the time I was unable to locate all the picture tiles needed to tile a door threshold which was damaged. As a result, it was decided to just clean and seal the floor leaving the damaged tiles in place the customer said he would give us a call once the replacement tiles had been located.

Four years later and the floor needed cleaning and sealing again however this time the necessary replacement tiles had been sourced on eBay and so we were called back to do that and repair the threshold. Hallways being the main throughfare through the house do experience a lot of traffic so it’s not unusual for a sealer to wear off after a few years and need replacing.

Victorian Hallway Before Renovation Chester City Centre

Repairing and Cleaning a Victorian Hallway Tiles

The first job was to cut out the damaged tiles and replace with the replacements. This involves carefully chiselling out the old tiles so as not to disturb those adjacent. It’s not unusual for work like this to dislodge more tiles than you had intended so slow and gentle is the best approach. Once the old tiles have been removed the base is cleaned up and old adhesive scraped away.

Victorian Hallway Before Renovation Chester City Centre

The next step was to clean the floor using a strong dilution of Tile Doctor Pro-Clean which is a alkaline cleaner and stripper that will clean and remove any remaining sealer from the tiles. The solution was left to soak in for ten minutes before being scrubbed in using a weighted buffing machine fitted with a Black pad. The released dirt was then removed with a wet vacuum.

The next step was to treat the tiles to an acid rinse using Tile Doctor Grout Clean-up which was applied and removed using the same method as before. This process neutralises the pH level of the floor following the use of the alkaline cleaner earlier and ensures a better bond with the sealer.

The floor was then given another rinse with water and as it was drying, we laid in the section of replacement tiles. The replacement tiles were not an exact fit so some of the edges had to be rubbed down with 50-grit Diamond burnishing blocks to make the intricate pattern work. Once the Victorian tiled jigsaw puzzle matched the space, they were secured into place using rapid set adhesive.

Sealing a Victorian Tiled Hallway Floor

I left the floor to dry off overnight and returned the next day to apply a new sealer. Before doing so however I like to use a damp meter to take moisture readings from the floor. This is needed to ensure it is dry enough to seal which is important as any moisture in the tile can affect the sealer and lead to an inconsistent finish.

Victorian Hallway After Renovation Chester City Centre

The readings were fine so several coats of Tile Doctor Seal and Go Extra were applied, allowing each coat to dry for thirty minutes before applying the next. This product is an acrylic breathable sealer which adds a pleasing subtle shine to the tile. This is an important feature when choosing a sealer for old floors where moisture needs to be allowed to rise through the tile, otherwise it can become trapped under the floor and reach out to the walls causing rising damp.

Victorian Hallway After Renovation Chester City Centre

The hallway looked much cleaner and brighter once done and the door threshold now closely matched the one on the other side of the hallway completing the floor. Before leaving I took time to discuss aftercare cleaning for which I recommend Tile Doctor Neutral cleaner which is designed for the daily cleaning for sealed tiles; this is important as most domestic supermarket cleaners are simply too strong and can prematurely erode the sealer.

 

Professional Restoration of a Victorian Tiled Hallway in West Cheshire

Victorian Tiled Hallway Floor Cleaned, Repaired and Sealed in Chester Read More »

Victorian Hallway Floor Cleaned Sealed Tarvin Cheshire

Victorian Tiled Hallway Floor Cleaned and Sealed in Tarvin

I was recently contacted by a client who had just moved into a large Victorian property in the West Cheshire village of Tarvin about renovating their Victorian tiled hallway. Apparently, the floor was in good condition, and it would just be a case of removing what was left of the old sealer, deep cleaning the tiles and then applying a fresh seal. Unless the floor has been regularly maintained with the same sealer it’s important to remove all traces of old sealers before applying fresh.

Victorian Hallway Before Cleaning Tarvin Cheshire

A lot of the work we do at Tile Doctor can be a lot more involved, often requiring the sourcing of matching replacement tiles and rebuilding large sections of tiled flooring so straight forward clean and seal job is always welcome.

Stripping and Cleaning a Victorian Hallway Tiles

To remove what was left of the sealer and the ingrained dirt from the pores of the Victorian tile I dressed the floor with a strong dilution of Tile Doctor Pro-Clean. On this occasion I used a 1:3 dilution with water and applied it to the floor with a mop. I left it to soak into the tile for fifteen minutes before scrubbing so it could get to work breaking down the old sealer.

During this time, I set up a weighted floor buffer and fitted a black buffing pad, these pads are designed for scrubbing hard floors and lifting out the dirt. I applied a little water as required during this process to ensure the pad was lubricated. Shortly the cleaning solution darkened as the old sealer and dirt was released from the tile.

The soil was rinsed away with water and then removed using a wet vacuum. Once clear the floor was inspected and the process repeated until I was satisfied it was as clean as it could be and free of sealer.

Victorian Hallway After Cleaning Before Sealing Tarvin Cheshire

Sealing a Victorian Tiled Hallway Floor

I left the floor to dry off overnight and returned the next day to apply a new sealer. Before doing so however I like to use a damp meter to take moisture readings from the floor. This is needed to ensure it is dry enough to seal which is important as any moisture in the tile can affect the sealer and lead to an inconsistent finish.

To seal I started with the application of a single coat of Tile Doctor Colour Grow which is a colour intensifying breathable impregnator that soaks into the tile improving appearance and adding protection from within. Any excess sealant was removed by wiping the floor with a microfibre cloth and then it was left to dry for an hour.

This was followed with four coats of Tile Doctor Seal and Go Extra which is an acrylic breathable sealer which adds a pleasing subtle shine to the tile. This is an important feature when choosing a sealer for old floors where moisture needs to be allowed to rise through the tile, otherwise it can become trapped under the floor and reach out to the walls causing rising damp.

Victorian Hallway After Cleaning Sealing Tarvin Cheshire

The customer was very happy with the revamped hallway which made the house a lot brighter and welcoming. Before closing I should mention that for aftercare cleaning I recommend Tile Doctor Neutral cleaner which is designed for the daily cleaning for sealed tiles, this is important as most domestic supermarket cleaners are simply too strong and can prematurely erode the sealer.

 

Professional Restoration of a Victorian Tiled Hallway in West Cheshire

Victorian Tiled Hallway Floor Cleaned and Sealed in Tarvin Read More »

Cleaning an Old Terracotta Tiled Kitchen Floor in Runcorn

This post comes from a job I did for a customer in who lives in the town of Runcorn on the south bank of the River Mersey. The request was to restore the Terracotta floor tiles in the kitchen of a property which dated back to 1773 and still had all its original features inside and out. You can see from the photograph below that the tile and grout were looking very dull and well overdue a deep clean and seal.

Old Terracotta Kitchen Floor Before Cleaning Runcorn

Deep Cleaning a Terracotta Tiled Kitchen Floor

To clean the floor, I soaked the floor in a strong dilution of Tile Doctor Remove and Go which is a strong stripping and cleaning solution which removes sealers and also draws out ingrained stains and also the heavy grease build up that was present around the cooker.

After twenty to thirty minutes the solution was worked into the tiles using a black scrubbing pad fitted to a rotary machine. The soiled solution was then removed with a wet vacuum and this was followed by scrubbing the grout lines with more Remove and Go and a grout brush until they were clean. The whole floor was then rinsed with water to remove any soil and trace of cleaning product. The water was then extracted using the wet vacuum. The floor was then checked to make sure it was as clean as it could be and stubborn areas spot treated.

Once I was happy the floor was clean it became apparent that some of the grout was loose and would need replacing so I took care of that using a matching grout before calling it a day and leaving the floor to dry out overnight.

Sealing a Terracotta Tiled Kitchen Floor

We returned next morning and tested the tiles with a damp meter making sure it was dry before we could seal it. To seal the floor, I used Tile Doctor Seal and Go which adds a nice sheen to the tiles and works really well on Terracotta.

Old Terracotta Kitchen Floor After Cleaning Runcorn

I took some time to complete though as due to the porosity of the clay it required eight coats to fully seal the tiles. You have to wait between coats to allow them to dry however I was able to speed up the drying process though using an air blower.
 
 

Restoring an Old Terracotta Tiled Kitchen Floor in Cheshire

Cleaning an Old Terracotta Tiled Kitchen Floor in Runcorn Read More »

Restoring Life to Victorian Hallway Tiles in Warrington

Victorian tiles are a product of the gothic revival that occurred during the reign of Queen Victoria, these tiles are typically colourful and patterned, taking influence from medieval designs. Many property owners in the 21st century understand the value original features such as these floors can have and have chosen to maintain these original tiles.

Restoring them however isn’t always an easy process and we often get asked to deep clean and seal these floors including the example below of a Victorian tiled hallway in the hallway of a grand house in Warrington where the old sealer had gradually worn off allowing the tiles beneath to become dirty and discoloured.

Warrington is an area in Cheshire that expanded and urbanised during the Industrial Revolution period of the 18th and 19th centuries, with its major industries including steel and textiles. This coincided with the growing prosperity of the town, and as people grew wealthier they were able to build fantastic houses with equally fantastic Victorian tiled floors.

Cleaning a Dirty Victorian Tiled Hallway

To begin the restoration, I applied a strong dilution of Tile Doctor Pro-Clean, which is a high alkaline product, to both remove ingrained dirt and strip away any remaining old sealer that was still present on the tiles. It’s important to strip the floor of all old coatings and sealers to ensure optimum performance by the new sealer and also to avoid patchy results. The product was left to dwell on the floor for twenty minutes to break down the sealer and seep into the pores of the stone. I then scrubbed the tiles with a black pad and rotary machine to work the Pro-Clean deep into the tile.

Victorian Tiled Floor Before Cleaning Warrington

The resulting soiled cleaning solution was then removed using a wet vacuum machine and the floor was rinsed with water. There were a few stubborn areas that needed further work so these were spot treated using the same process and then followed this by neutralising anytrace of cleaning product on the tiles with a thorough rinse of water. I dried the tiles with the wet-vacuum once more before leaving them to dry out over the course of two days.

Victorian Tiled Floor Before Cleaning Warrington

Sealing a Victorian Tiled Hallway

Upon my return to the property I sealed the Victorian tiles using a combination of sealers which we have found is the most effective method of sealing Victorian tiles. Firstly, I applied a single coat of Tile Doctor Colour Grow, which is a colour intensifying impregnating sealer that soaks into the tile and really lifts the colourful the Victorian designs. Secondly, I applied four coats of Tile Doctor Seal and Go, which provides a durable low-sheen finish (as requested by the customer) and will protect against dirt and stains.

Victorian Tiled Floor After Cleaning Warrington

The customer was over the moon with the finished result. We love restoring these
original Victorian tiles because the transformations are truly in incredible. It’s easy to see why so many people want to have them maintained because they really add character to any property.

Victorian Tiled Floor After Cleaning Warrington

 
 

Cheshire Victorian Tiled Hallway Restoration

Restoring Life to Victorian Hallway Tiles in Warrington Read More »

Kitchen Tiles Transformed by Grout Recolouring in Stockton Heath

You often see some fantastic tiled surfaces transformations in lifestyle and home decoration magazines. This customer, who lives in Stockton Heath, had recently seen a feature in which an area of white kitchen tiles had been transformed by changing the white grout to a charcoal coloured grout, giving it a new and particularly striking appearance.

Grout before recolouring at Stockton Heath kitchen Grout before recolouring at Stockton Heath kitchen

Very impressed with the result, she wanted to know if Tile Doctor could do the same for her white kitchen tiles, which covered the majority of the room. I told her that not only could we do it – we could do it even better in the space of a day!

Here’s how we did it.

Cleaning and Recolouring White Kitchen Tiles

Our process for recolouring grout involves an application of a pre-treatment cleaner to ensure a complete refresh of both the grout and tiles. This pre-treatment cleaner removes any dirt and stains, as well as prepares the the grout joints for a superior bond with the Grout Colourant. I applied this carefully and scrubbed it in using a specialised grout brush, before drying the area with a heat gun.

It was then time to apply Charcoal Gray Grout Colourant, one of the options from our range of 10 Grout Colourants that includes Black, Ivory, and Cappuccino. Our Grout Colourant is an easy-to-use waterborne epoxy that not only recolours grout joints, but also seals and rejuvenates them to guarantee their long-term protection. This was applied using a good old fashioned toothbrush, and any excess was swiftly removed.

Grout during recolouring at Stockton Heath kitchen Grout during recolouring at Stockton Heath kitchen

To complete the process I removed the old silicone around the windows and worktops and replaced with a fresh batch. When the customer saw the finished result she was over the moon. She thought this kind of transformation could only be made with difficulty and at a high cost but we showed that it’s a very simple and cost-effective process for any home owner.

Grout after recolouring at Stockton Heath kitchen Grout after recolouring at Stockton Heath kitchen

 
 

Professional Kitchen Tile Cleaning and Grout Recolouring in Stockton Heath

Kitchen Tiles Transformed by Grout Recolouring in Stockton Heath Read More »

Full Restoration Of A Victorian Tiled Hallway In Warrington

Victorian tiles have a classic aura about them. They have been in use for over 150 years but have never really gone out of style due to their unique style and variety of patterns. As such, we often encounter both Victorian tiles that are very old, and Victorian tiles are quite new. Time, however, can certainly expose the tiles to all manner of wear and tear, and regular professional maintenance will always be necessary to keep them looking good.

As you can see from the photographs below, this particularly old Victorian tiled hallway at a house in Warrington was in pretty bad shape, with missing and cracked tiles. Not to mention that it clearly hadn’t been treated to a deep clean and fresh seal in a very long time. The property owner contacted me to set the situation right.

Victorian tiled hallway before restoration Warrington

Repairing and Cleaning Dirty and Damaged Victorian Tiles

Before I could begin with the restoration, it was necessary to order and reinstall replacements for the missing tiles. Fortunately, Tile Doctor maintains a list of suppliers that we can go to for these. Loose tiles were also refixed and grouted, before being left to dry over night. The result was an almost entirely rebuilt floor of original and replacement Victorian tiles.

Victorian tiled hallway during restoration Warrington

The next day I started the restoration by using a hand help flex machine fitted with three-inch diamond encrusted discs to lightly grind out the scratches in some of the original tiles. This was followed by a deep cleaning of the floor with Tile Doctor Pro Clean in combination with a black buffing pad. I repeated the process multiple times with this reliable alkaline cleaner to ensure all tiles were thoroughly and consistently clean.

The last step in the cleaning process was to rinse the floor thoroughly to remove any trace of chemicals, before soaking up any excess moisture using a wet vacuum. I gave the floor another night to dry fully, as it could only be sealed when I was sure all moisture had disappeared.

Sealing Victorian Tiles

On the third and final day of work, I started by checking the tiles were completely dry. This is essential because even a small amount of moisture can cloud the sealer and prevent it from performing correctly.

When satisfied with the state of the floor, I proceeded to seal it with a combination of six coats Tile Doctor Seal and Go and one coat of Tile Doctor Colour Grow. Seal and Go is a topical sealer that provides a durable layer of protection on the surface of tiles, plus a high-quality sheen finish. Colour Grow, by comparison, is an impregnating sealer, meaning it penetrates into the pores of the stone to act as a barrier against ingrained dirt and stains. It also enhances the range of different colours in the tiles.

Victorian tiled hallway after restoration Warrington

As you can see from the last photographs, this combination of cleaning and two sets of sealer worked wonders to restore the character to the old tiles. My customer was over the moon.

Victorian tiled hallway after restoration Warrington

 
 

Professional Victorian Tiled Hallway Restoration in Cheshire

Full Restoration Of A Victorian Tiled Hallway In Warrington Read More »

Bringing Life Back to Encaustic Cement Tiles in Chester

This very old Encaustic tiled flooring was uncovered at a property in Chester when the present owners started to undertake renovation. They removed the carpets and vinyl tiles from the hallway, revealing the Encaustic tiles to find that they were in truly horrific condition. This included being covered by heavy dirt, dust and, in some parts, by a sticky black bitumen.

Encaustic tiles are made out of compressed cement, and were commonly used in properties built during the Edwardian and Victorian period. This gives us a good idea of just how old these tiles are – but the owners were keen to see what Tile Doctor could do to restore their condition.

Encaustic tiled hallway before restoration in Chester Encaustic tiled hallway before restoration in Chester

Cleaning Extremely Dirty Encaustic Cement Tiles

The black bitumen was my main concern when it came to cleaning the tiles. To remove this, along with all the other dirt and dust, our powerful cleaner for heavy soil buildup, known as Tile Doctor Remove and Go, was applied.

The product, which is also effective for removing adhesive and paint stains, was worked into the tiles then left to dwell for thirty minutes, before being scrubbed with a black pad fitted to a rotary machine. The resulting cleaning residue was soaked up with a wet vac machine. This cleaning process was repeated once more over to get the tiles as clean as possible, before leaving them to dry overnight.

Sealing Encaustic Cement Tiles

The next day, damp readings were taken to make sure the floor was dry enough to seal. It’s essential to take damp readings before sealing – especially with old tiled floors that may not have a damp proof membrane installed – as even the slightest amount of excess moisture can damage the performance of the sealer.

Two types of sealer were used in this situation. First to be applied was a single coat of Tile Doctor Colour Grow, an impregnating, colour intensifying sealer which enhances the best shades in the tiles. Following this, four coats of Tile Doctor Seal and Go were applied. This is a topical sealer, which means it builds a layer of protection on the surface of the floor, while also providing an aesthetically pleasing low-sheen finish.

The customer was over the moon at the end result. At first the floor looked to be with a lost cause, but with the right cleaning methods and products it has been a restored to a standard where it almost appears new. Another satisfied customer!

Encaustic tiled hallway after restoration in Chester Encaustic tiled hallway after restoration in Chester

 
 

Professional Restoration of an Old Encaustic Cement Floor in Cheshire

Bringing Life Back to Encaustic Cement Tiles in Chester Read More »

Recently Uncovered Victorian Tiles Completely Transformed in Lymm

When you uncover a tiled floor after it has been covered by carpet for many years, it’s almost a given that it will be in a bad state. However, my customer, who lives in the town of Lymm, wasn’t expecting the Victorian tiled hallway they had recently uncovered to be in quite so terrible a state. As you can see from the photograph, it has been completely devastated by paint plaster and a big pool of cement floor leveller. Understandably, the formerly colourful appearance of the tiles had completely drained and it would require a through restoration to get them back into a usable condition.

Victorian Floor Uncovered Before in Lymm

Cleaning a Victorian Tiled Floor

To begin the restoration, I mixed a strong cleaning solution which consisted of Tile Doctor Remove & Go combined 50/50 with Tile Doctor Pro Clean. Remove & Go is a heavy duty remover that breaks down old sealers, along with adhesives, paint stains and other tough soil build up where as Pro-Clean is a versatile alkaline-based cleaner that reliably eradicates dirt on a wide variety of natural stone floors.

The solution was applied liberally across the floor, and left to dwell for a short period, allowing time for it to soften up the paint plaster. Next, I fitted a coarse scrubbing pad to my rotary cleaning machine and began to scrub the solution into the tiles, with a big difference to the appearance of the tiles being made quite quickly. The resulting cleaning slurry was promptly removed using a wet-vac machine.

I repeated the process two times to provide an extra thorough clean and then give the floor a thorough rinse. Some particularly stubborn marks remained on the floor which I was able to remove using Tile a Doctor Acid Gel, a blend of phosphoric and hydrochloric acids in gel form that’s easy to control. The floor was then left to dry fully overnight.

Sealing a Victorian Tiled Floor

The next morning, I returned to the property and ran some damp tests. This is incredibly important to do before sealing any tiled floor because any excess moisture can cloud the sealer and prevent it from doing its job properly.

Once satisfied that the floor could be sealed, I applied several coats of Tile Doctor Seal and Go, our topical sealer which provides both a robust surface seal and a long-lasting low sheen finish in one and ideal for Victorian tiles.

Victorian Floor Uncovered After in Lymm

It would be an understatement to say that this Victorian tiled floor was transformed. The customer was amazed at the results considering how bad a state the tiles had been in just a day earlier. When you have a situation like this, it’s hard to believe the tiles could ever be fully restored. Nonetheless, we could now see them in their full and original glory, and needless to say, the customer was very, very pleased with the result.
 
 

Professional Victorian Tiled Floor Restoration in Lymm

Recently Uncovered Victorian Tiles Completely Transformed in Lymm Read More »

Grout Colouring and Cleaning for Quarry Tiles in Appleton

It’s always a good idea to double-check any tile cleaning advice you receive with a professional. Sometimes advice can be inaccurate and cause more problems than good. Such was the case with this customer, who lives in the small town of Appleton near Warrington. He had been advised by his builder to use brick acid to remove carpet glue from a newly discovered Quarry tiled floor. Taking the advice, he had washed the floor several times with a solution of brick acid diluted with water. But while this seemed to successfully remove the carpet glue, it also severely discoloured the grout lines, leaving the entire floor looking grubby and unappealing.

The customer was just about to go on holiday, and asked me to see what could be done to restore the floor’s appearance while he was gone. With the house to myself, I got to work.

Quarry Tiles Before Cleaning in Appleton

Cleaning a Stained Quarry Tiled Floor

My first job was to strip the floor property to remove old sealers present on the tile using a strong dilution of our high alkaline cleaner, Tile Doctor Pro Clean. We use this cleaner on all types of tile and natural stone due to its versatility and consistency.

I spread the solution onto the floor and left to dwell for twenty minutes before scrubbing with a black pad fitted to a floor rotary machine. This process also removed the years of dirt and dust that had penetrated through the recently removed carpet. I also paid attention to the grout lines giving them a good scrub with a stiff grout brush, but the acid staining proved to be impossible to remove completely.

While I’m not sure exactly how long the floor had been covered by carpet, it’s safe to say a deep clean had been long, long overdue. Once I had cleaned the floor to a high standard, I used a wet-vac to remove the now dirty cleaning solution from the floor, before leaving it to dry off completely overnight.

Sealing a Quarry Tiled Floor

Upon my return to the property the next day, I tested to make sure the floor was dry enough to seal, which is important as excess moisture can cloud the sealer and damage its performance.

Once satisfied, I applied one coat of Tile Doctor Colour Grow, which is our impregnating sealer designed to really bring out the natural colours in the tile, followed by two coats of Tile Doctor Seal and Go to give the tiles a stain resistant, low-sheen finish.

After this was dry I coloured the grout lines with a matching Tile Doctor Grout Colourant to cover and hide the damage the acid had caused to the grout lines. Finally, I gave the floor three more coats of Seal and Go to add the finishing touches.

Quarry Tiles After Cleaning in Appleton

My customer returned from holiday to find a completely transformed floor. Looking at the before and after photos, it is easy to see why he was more than happy with the result! Another satisfied customer.
 
 

Restoration of Quarry Tiles in Appleton

Grout Colouring and Cleaning for Quarry Tiles in Appleton Read More »

Grubby, Unsealed Slate Tiles Revitalised in Lymm

One of the worst examples of bad tiling practice is to leave a newly installed floor unsealed and therefore unprotected. This is exactly the problem that had occurred at this property in Lymm, West Cheshire. A builder has installed a new Slate tiled floor in the kitchen of this property, but had neglected to seal it, leaning the tiles exposed to dirt, stains, and other general muck so they quickly lost their appearance. To be fair I could not fault the installation but the floor now looked terrible.

Slate Floor Before Clean and seal grout recolour in Lymm Cheshire

The property owner was keen to have the grubby Slate tiles refreshed and sealed, so she gave me a call. I agreed to complete the work and travelled to the property in Lymm – which incidentally means “place of running water” in Celtic – and was named after an ancient stream that ran through the village centre.

Cleaning a Grubby Slate Tiled Floor

Upon my arrival at the property I got straight to work, cleaning the tiles with our heavy duty remover/cleaner, Tile Doctor Remove and Go. This was applied to the floor, left to soak in and then scrubbed into the tile using a rotary machine fitted with a black scrubbing pad to break down the layers of muck. Normally I would use Remove and Go to strip away old coatings and sealers, but here of course there was no sealer to begin with just a lot of ingrained dirt.

I also carefully scrubbed the grout lines with a special grout brush as I went along. The grout lines are often where dirt can be come easily ingrained, and it was no different here. The floor was then rinsed off with clean water, and any resulting could residue was quickly removed using a wet vac machine. Finally, the floor was left to dry off overnight.

Sealing a Slate Tiled Floor

The next day I returned to the property and started by checking that the floor was completely dry and ready to be sealed. This involved running damp tests to check for excess moisture. When satisfied, I proceeded to seal the floor with a single coat of our impregnating, colour enhancing sealer, Tile Doctor Colour Grow followed by two coats of Tile Doctor Seal and Go Extra, which gives the tiles a fantastic sheen finish.

Refreshing Grout with a Grout Colourant

The customer requested for the grout lines to be recoloured, but first I had to leave the property overnight to allow the sealer to dry. The next morning, I coloured the grout lines with white Tile Doctor Grout Colourant which is just a question of applying the colourant with a small brush and then wiping the excess off the tiles. It’s not a tough job but it can be quite fiddley and it does make a real difference to the appearance of the grout.

Slate Floor After Clean and seal grout recolour in Lymm Cheshire

As you can see from the After photograph the white Grout Colourant contrasted very nicely against the naturally dark Slate. The absence of a sealer had left the floor looking very dull but now, with a fresh, robust seal, it has been completely revitalised. My customer was exceptionally pleased with her hugely improved kitchen floor.
 
 

Post Installation Treatment of a Slate Tiled Kitchen Floor in Cheshire

Grubby, Unsealed Slate Tiles Revitalised in Lymm Read More »

Scroll to Top