Victorian Tiled Hallway

Victorian Hallway Renovation Chester City Centre

Victorian Tiled Hallway Floor Cleaned, Repaired and Sealed in Chester

We first renovated this Victorian hallway floor in Chester City Centre four years ago but at the time I was unable to locate all the picture tiles needed to tile a door threshold which was damaged. As a result, it was decided to just clean and seal the floor leaving the damaged tiles in place the customer said he would give us a call once the replacement tiles had been located.

Four years later and the floor needed cleaning and sealing again however this time the necessary replacement tiles had been sourced on eBay and so we were called back to do that and repair the threshold. Hallways being the main throughfare through the house do experience a lot of traffic so it’s not unusual for a sealer to wear off after a few years and need replacing.

Victorian Hallway Before Renovation Chester City Centre

Repairing and Cleaning a Victorian Hallway Tiles

The first job was to cut out the damaged tiles and replace with the replacements. This involves carefully chiselling out the old tiles so as not to disturb those adjacent. It’s not unusual for work like this to dislodge more tiles than you had intended so slow and gentle is the best approach. Once the old tiles have been removed the base is cleaned up and old adhesive scraped away.

Victorian Hallway Before Renovation Chester City Centre

The next step was to clean the floor using a strong dilution of Tile Doctor Pro-Clean which is a alkaline cleaner and stripper that will clean and remove any remaining sealer from the tiles. The solution was left to soak in for ten minutes before being scrubbed in using a weighted buffing machine fitted with a Black pad. The released dirt was then removed with a wet vacuum.

The next step was to treat the tiles to an acid rinse using Tile Doctor Grout Clean-up which was applied and removed using the same method as before. This process neutralises the pH level of the floor following the use of the alkaline cleaner earlier and ensures a better bond with the sealer.

The floor was then given another rinse with water and as it was drying, we laid in the section of replacement tiles. The replacement tiles were not an exact fit so some of the edges had to be rubbed down with 50-grit Diamond burnishing blocks to make the intricate pattern work. Once the Victorian tiled jigsaw puzzle matched the space, they were secured into place using rapid set adhesive.

Sealing a Victorian Tiled Hallway Floor

I left the floor to dry off overnight and returned the next day to apply a new sealer. Before doing so however I like to use a damp meter to take moisture readings from the floor. This is needed to ensure it is dry enough to seal which is important as any moisture in the tile can affect the sealer and lead to an inconsistent finish.

Victorian Hallway After Renovation Chester City Centre

The readings were fine so several coats of Tile Doctor Seal and Go Extra were applied, allowing each coat to dry for thirty minutes before applying the next. This product is an acrylic breathable sealer which adds a pleasing subtle shine to the tile. This is an important feature when choosing a sealer for old floors where moisture needs to be allowed to rise through the tile, otherwise it can become trapped under the floor and reach out to the walls causing rising damp.

Victorian Hallway After Renovation Chester City Centre

The hallway looked much cleaner and brighter once done and the door threshold now closely matched the one on the other side of the hallway completing the floor. Before leaving I took time to discuss aftercare cleaning for which I recommend Tile Doctor Neutral cleaner which is designed for the daily cleaning for sealed tiles; this is important as most domestic supermarket cleaners are simply too strong and can prematurely erode the sealer.

 

Professional Restoration of a Victorian Tiled Hallway in West Cheshire

Victorian Tiled Hallway Floor Cleaned, Repaired and Sealed in Chester Read More »

Victorian Hallway Floor Cleaned Sealed Tarvin Cheshire

Victorian Tiled Hallway Floor Cleaned and Sealed in Tarvin

I was recently contacted by a client who had just moved into a large Victorian property in the West Cheshire village of Tarvin about renovating their Victorian tiled hallway. Apparently, the floor was in good condition, and it would just be a case of removing what was left of the old sealer, deep cleaning the tiles and then applying a fresh seal. Unless the floor has been regularly maintained with the same sealer it’s important to remove all traces of old sealers before applying fresh.

Victorian Hallway Before Cleaning Tarvin Cheshire

A lot of the work we do at Tile Doctor can be a lot more involved, often requiring the sourcing of matching replacement tiles and rebuilding large sections of tiled flooring so straight forward clean and seal job is always welcome.

Stripping and Cleaning a Victorian Hallway Tiles

To remove what was left of the sealer and the ingrained dirt from the pores of the Victorian tile I dressed the floor with a strong dilution of Tile Doctor Pro-Clean. On this occasion I used a 1:3 dilution with water and applied it to the floor with a mop. I left it to soak into the tile for fifteen minutes before scrubbing so it could get to work breaking down the old sealer.

During this time, I set up a weighted floor buffer and fitted a black buffing pad, these pads are designed for scrubbing hard floors and lifting out the dirt. I applied a little water as required during this process to ensure the pad was lubricated. Shortly the cleaning solution darkened as the old sealer and dirt was released from the tile.

The soil was rinsed away with water and then removed using a wet vacuum. Once clear the floor was inspected and the process repeated until I was satisfied it was as clean as it could be and free of sealer.

Victorian Hallway After Cleaning Before Sealing Tarvin Cheshire

Sealing a Victorian Tiled Hallway Floor

I left the floor to dry off overnight and returned the next day to apply a new sealer. Before doing so however I like to use a damp meter to take moisture readings from the floor. This is needed to ensure it is dry enough to seal which is important as any moisture in the tile can affect the sealer and lead to an inconsistent finish.

To seal I started with the application of a single coat of Tile Doctor Colour Grow which is a colour intensifying breathable impregnator that soaks into the tile improving appearance and adding protection from within. Any excess sealant was removed by wiping the floor with a microfibre cloth and then it was left to dry for an hour.

This was followed with four coats of Tile Doctor Seal and Go Extra which is an acrylic breathable sealer which adds a pleasing subtle shine to the tile. This is an important feature when choosing a sealer for old floors where moisture needs to be allowed to rise through the tile, otherwise it can become trapped under the floor and reach out to the walls causing rising damp.

Victorian Hallway After Cleaning Sealing Tarvin Cheshire

The customer was very happy with the revamped hallway which made the house a lot brighter and welcoming. Before closing I should mention that for aftercare cleaning I recommend Tile Doctor Neutral cleaner which is designed for the daily cleaning for sealed tiles, this is important as most domestic supermarket cleaners are simply too strong and can prematurely erode the sealer.

 

Professional Restoration of a Victorian Tiled Hallway in West Cheshire

Victorian Tiled Hallway Floor Cleaned and Sealed in Tarvin Read More »

Scroll to Top