Ultra-Seal Archives - West Cheshire Tile Doctor

Travertine Kitchen Utility Floor Renovation Neston Wirral

Deep Cleaning a Filthy Travertine Floor Tiles in Neston Utility Room

This Travertine tiles in the Utility room of this property in Neston on the Wirral Peninsula had become filthy with ingrained dirt. Any sealer that was once present on the stone or grout has long since worn off and the grout especially had darkened with ground in dirt.

Travertine Kitchen Utility Floor Before Cleaning Neston Wirral

This is a common problem with stone floors as the sealer ensures dirt remains on the surface where it is easily cleaned away. Sealers however wear down with use and so they do need replacing every three to five years depending on use. This happens gradually over time and tends to go un-noticed until eventually you realise it no longer looks like it should.

To renovate the floor, I quoted for deep cleaning the stone and grout, strip off what was left of the old sealer, polish the stone and then re-seal to ensure easy maintenance in the future. Some of the Travertine tile also had small pitts that were dirt magnets so I offered to fill these in with a specialist stone filler as part of the work.

Happy with the price and relieved to have found someone who could renovate the floor a date was set for they work to start.

Deep Cleaning Travertine Tile and Grout

The best way to restore the appearance of honed stone is the application of diamond encrusted burnishing pads which come is a set of four pads with different grits. Work starts with the coarse 400-grit pad which is fitted to a rotary floor machine and run over each tile several times using only water for lubrication. This coarse pad cuts through the stone to remove dirt, old sealer, marks and fine scratches. The water turns into a dark slurry and this is rinsed off and extracted with a wet vacuum.

Pads can struggle to reach into the recesses of the grout line so the next step was to hand clean the grout using Tile Doctor Pro-Clean, scrubbed in with a stiff brush. Pro-Clean is a strong alkaline tile and grout cleaning product which is safe to use on all types of tile and grout. The soiling was then rinsed and extracted as before with the wet vacuum.

Next step was to fill in the small holes in the Travertine with a specialist stone filler which is colour matched to the stone. Once done its very difficult to detect and will prevent dirt from becoming lodged.

Once the filler had set work continued with the burnishing of the floor using the 800 and 1500-grit pads using the same process as before with water. These pads bring up the appearance of the stone building up a lovely finish. The floor was then left to dry out overnight.

Sealing Travertine Tiles

I returned the next morning and set about applying the last pad which is a very fine 3000-grit polishing pad. This last pad is applied dry with only a little water sprayed onto the Travertine; this is a process we call a “Spray Burnish”.

Last step was to seal the floor with an impregnating sealer that works by occupying the pores in the stone thereby preventing dirt from residing there and ensuring it remains on the surface where its easily cleaned away. The client loved the light appearance of the natural stone so Tile Doctor Ultra-Seal was applied which provides invisible protection and doesn’t darken the stone.

Travertine Kitchen Utility Floor After Renovation Neston Wirral

One the sealer had dried I gave the floor a quick buff with a White Pad and once complete the floor looked so much cleaner and lighter; the grout in particular was transformed by the treatment. For aftercare cleaning I recommended the use of Tile Doctor Stone Soap which will help maintain the patina on the stone.

Professional Cleaning and Polishing of Travertine Ties in the Wirral

Deep Cleaning a Filthy Travertine Floor Tiles in Neston Utility Room Read More »

Red Wine Stained Limestone Fireplace Renovated in Sealand

Red Wine Stains Removed from a Limestone Fireplace Surround in Sealand

1 Comment / Chester Tile Cleaning, Fireplace Cleaning, Limestone Tile Cleaning and Polishing / Alastair Robb

Earlier this year we was contacted by a resident on a new housing estate on the former MOD Sealand RAF base about their wine stained Limestone fireplace. This base was famous for its gliders and spitfires on the edge of North Wales and Cheshire but has since been closed.

The customer had dropped a glass of red wine on her new Limestone fireplace which resulted in obvious dark staining as it dripped down the Limestone. Naturally The customer was keen to have the stains removed and was horrified how badly it had affected the stone.

Red Wine Stained Limestone Fireplace Before Cleaning in Sealand

Fortunately, after researching the problem on the internet, she found Tile Doctor who have a simple solution for this problem which I’ll detail below.

Removing Wine Stains from a Limestone Fireplace

The first job was to protect the new carpet and walls from any splashing during the cleaning process. With that in place I started to apply our secret solution for dealing with these sorts of problems in the form of Tile Doctor Reduxa which is designed to remove acid stains from calcareous stone.

The stained areas were sprayed with Reduxa and then left to soak in for a few minutes. The solution was then warmed up with a heat gun. Doing this causes the solution to evaporate into a vapour which draws out the stain. This process needs repeating four or five times to draw out the stain but its very effective and does the job. Once removed the Fireplace was washed down with clean water then dried off with the heat gun.

The stone had never been sealed before so the last job was to apply Tile Doctor Ultra-Seal which is an impregnating sealer that works by soaking into the pores of the stone thereby preventing anything from residing there. Once dry it becomes invisible and does not change the colour of the stone.

Red Wine Stained Limestone Fireplace After Cleaning in Sealand

The work was soon completed and as you can imagine my customer was relieved that the staining was now gone.

Professional Removal of Wine Stains from Limestone in Cheshire

Red Wine Stains Removed from a Limestone Fireplace Surround in Sealand Read More »

Scratched Corian Worktop Renovation Cuddington Cheshire

Removing Scratches from Corian Worktops in Cuddington

1 Comment / Winsford Tile Cleaning / Alastair Robb

We recently received an enquiry from the Cheshire village of Cuddington regarding a Corian worktop which was cracked and scratched in many places. Although well known for our floor restoration work the equipment, we use works equally well on stone worktops so we were happy to be of assistance.

Scratched Corian Worktop Before Renovation Cuddington Cheshire

Granite is probably the ultimate surface for a Kitchen worktop and although extremely durable it is expensive. Corian is manmade and has a lower cost but is more easily damaged by heat and scratching than natural stone. It is however a very solid material and we find it can be maintained in a similar way to natural stone.

Having discussed the size of the worktop and costs to repolish the surface a date was worked out for a visit.

Polishing Scratches out of a Corian Worktop

To renovate the Corian Countertop the first step was to run over the surface with a hand held polishing machine fitted with a 800-grit resin disc. Water is used to keep the worktop wet so as to absorb the fine dust that is generated. The pad needs to be applied to the point where the scratches are removed and then to avoid creating shallow areas its necessary to run the pad over the entire surface taking it down to the same level.

The worktop is rinsed with water to remove the fine slurry that is generated and then the process repeated with a 1200-grit disc followed by another rinse. At this point all the scratches and cracks in the Corian should have disappeared but the polished appearance will had dulled as a result.

Scratched Corian Worktop During Renovation Cuddington Cheshire

To put back the shine on the countertop it needs to be polished and for this we like to use Tile Doctor Diamond Burnishing pads which are available in a 6 inch diameter and a perfect size for use with the hand held buffer. It’s a similar process using water for lubrication and starting with an 800-grit pad and finishing with a 1500-grit pad.

Sealing a Corian Kitchen Worktop

Once the worktop was dry two coats of sealer were applied to protect it. On this occasion I used Tile Doctor Ultra-Seal which is undetectable natural look product that is recommend for use in food preparation and serving areas.

Scratched Corian Worktop After Renovation Cuddington Cheshire

To finish I buffed the worktop with a 6-inch white pad, the transformation was fantastic and my costumer was over the moon. For aftercare I recommend the use of Tile Doctor Stone Patina Spray which is a mild cleaner that will maintain the patina of the stone.

Professional Corian Worktop Polishing in West Cheshire

Removing Scratches from Corian Worktops in Cuddington Read More »

Travertine Tiled Kitchen Floor Before After Polishing Delamere

Polishing a Travertine Tiled Kitchen Floor in Delamere

1 Comment / Grout Cleaning, Travertine Tile Cleaning, Winsford Tile Cleaning / Alastair Robb

This Travertine Polishing enquiry came from a homeowner in the village of Delamere which is in the middle of the Cheshire countryside, West of Winsford. The customer had recently moved to the area and was unhappy with the dull appearance of their Travertine tiled kitchen floor, there were also small holes in the tiles which needed filling.

Travertine is a natural stone and holes or pitting can appear as thin layers of surface stone break down to reveal a cavity underneath. This is a common problem and can be made worse by the use of strong acidic cleaning products that eat away at the surface over time.

The solution was to fill the holes using a matching epoxy filler, deep clean the grout and then burnish the tiles to remove the dirt and bring up the polish. Happy with my quote we agreed a date for the work to commence.

Travertine Floor Tiles Before Polishing Delamere

Grout Cleaning and Filling Pitts in a Travertine Tiled Kitchen Floor

The first job was to fill the holes/pitts in the Travertine using a purpose made product called Tenax which comes in a variety of colours and is described as an adhesive filler that sets hard.

Travertine Floor Tiles During Filling Delamere

Step two was to get the grout clean so I applied a strong dilution of Tile Doctor Pro-Clean which is an alkaline tile and grout cleaner. I left this to soak in and breakdown the dirt for roughly ten minutes before scrubbing it in by hand. Once done the floor was rinsed with water and the soil now released from the stone extracted using a wet vacuum.

Polishing a Travertine Tiled Kitchen Floor

To bring back the polished appearance of the Travertine I applied a set of four diamond burnishing pads of different grades in sequence from coarse to extra fine. The first two pads take off any remaining sealer and dirt, the floor is then washed down and the residue removed by wet vacuum. We then go onto the third pad which is a 1500 grit which starts to put a shine back on the stone. The floor is then washed down again with clean water and the slurry removed with the wet vacuum.

The floor is then forced dried by large fans and once dry the last pad is applied which is a 3000-grit pad that puts a high shine on the floor. A small amount of water is sprayed onto the tiles during this process which we refer to as a spray burnish.

Sealing a Travertine Tiled Kitchen Floor

Spray burnishing also leaves the floor dry and ready to be sealed. The owner wanted the Travertine to look as natural as possible so two coats of Tile Doctor Ultra Seal were applied. This is an impregnating sealer which is recommended for use on polished stone and for use in kitchens. To finish and to remove excess sealer the floor was then buffed with a White pad.

Travertine Kitchen Floor Tiles After Polishing Delamere

I mentioned at the beginning of this post not to use strong cleaning products on Travertine and this advice is especially relevant if the stone is sealed as strong products including bleach can also erode the sealer. For the regular cleaning of sealed Travertine, I would recommend using Tile Doctor Stone Soap which is a gentle but effective cleaner that also helps maintain the patina.

Professional Renovation of a Dull Travertine Kitchen Floor in Cheshire

Polishing a Travertine Tiled Kitchen Floor in Delamere Read More »

Travertine Kitchen Floor Renovated in Thurstaston Wirral

Polishing Travertine Kitchen Floor Tiles in Thurstaston

1 Comment / Grout Cleaning, Travertine Tile Cleaning, Wirral Tile Cleaning / Alastair Robb

Although the Travertine tiles in this beautiful kitchen floor in Thurstaston were in fair condition the Grout had turned black with dirt. This normally happens when the stone is sealed but the grout has been left unprotected, then when cleaning the floor dirt is washed off the stone into the grout line where it gets trapped in the rough surface of the grout. Overtime the dirt builds up and the grout lines turning it black and completely changing the appearance of the floor.

Travertine Kitchen Floor Before Renovation Thurstaston Wirral

After visiting the property, I could see the polished appearance of the Travertine had faded and the sealer was wearing thin, so I recommend not only cleaning the grout but also burnishing the stone to deep clean it and restore its polished appearance.

Burnishing and Cleaning a Travertine Kitchen Floor

To get the best from a stone floor, we apply a set of Diamond encrusted burnishing pads of different grades starting with a coarse 400 grit pad run over the tiles using a strong dilution of Tile Doctor Pro-Clean. Once the pad had been run over each tile at least three times attention was turned to the grout lines which was scrubbed with more Pro-Clean and a stiff brush. Afterwards the floor is rinsed down with water and then the dirty residue is extracted with a wet vacuum.

The 400-grit pad was followed by the application of a medium 800-grit pad using only water this time to add lubrication. Again the floor is rinsed with water after use and the soiling extracted with the wet vacuum. The next two pads are a Fine 1500 grit and Extra Fine 3,000 grit which really build up a high-quality polish on the stone. Before applying the 3000-grit I spent some time filling in the larger pits (holes) in the Travertine with an epoxy filler. Travertine is notorious for having this problem and being an acid sensitive stone it very important not to use even a mildly acidic cleaning product as this can make the problem worse.

Sealing a Travertine Tiled Floor

The floor was left to dry off fully overnight and I returned the next day to seal the Travertine first checking with a damp meter that the stone was dry. The customer wanted a natural look finish to the Travertine, so to seal the tiles I applied two coasts of Tile Doctor Ultra Seal which is an impregnating sealer doesn’t change the look of the stone in anyway. Ultra-Seal is an impregnating sealer that works under the surface by occupying the pores in the stone thus preventing dirt from becoming ingrained there.

Travertine Kitchen Floor After Renovation Thurstaston Wirral

Once the sealer had dried the floor was treated to a gentle buff with a white pad to bring up the shine even further. Once complete the stone looked a lot healthier and the grout looked so much cleaner.

Professional Travertine Floor Polishing in Cheshire

Polishing Travertine Kitchen Floor Tiles in Thurstaston Read More »

Limestone Tiled Restaurant Floor Renovated Chester

Cleaning a Limestone Floor in a Chester Restaurant Ready for Reopening

1 Comment / Chester Tile Cleaning, Limestone Tile Cleaning and Polishing, Work by Category, Work by Location, Work History / Alastair Robb

We were asked to clean and seal a large Limestone floor at a restaurant on the outskirts of Chester. The large hostelry and Steak House was reopening after being closed since lock down and the floor had not been cleaned since.

Limestone Floor Before Cleaning Chester Restaurant Cheshire

I arranged a visit to survey the floor and could see that although the Limestone tiles were still stained with beer, wine, and other detritus they were in good condition for a busy commercial floor. On the back of that visit, I was able to provide a detailed quote and at the request of the manager agreed to do the work three days before it was due to open.

Although this did not leave much time in the way of contingency it made a lot of sense for the manager as the floor would be pristine for the grand opening. I had calculated that the work should take two days and that left them a day for final preparations, including setting out the furniture and last-minute staff training.

Cleaning a Limestone Tiled Restaurant Floor

To get the limestone floor clean I sprayed the area with a mixture of Tile Doctor Pro-Clean (a multi-purpose degreaser tile cleaner) and Tile Doctor Remove and Go (a multi-purpose stripper and coatings remover). The cleaning cocktail was left to soak into the stone for a good twenty minutes to allow it time to break down ingrained dirt and marks in the old polish from around the fixed furniture and skirting boards that had been applied by the cleaners over the years.

To help the process of taking the stains out of the limestone the cleaning mixture was worked into the tile using a coarse 400-grit diamond encrusted burnishing pad. The pads are fitted to a rotary buffer machine applying weights were required to maintain a better contact with the stone. The cleaning solution turns into a dark slurry as the dirt is released from the floor and once the pad has been over each tile at least three times as vet vacuum is used to extract it.

This process was then followed up with the application of a finer 800-grit pad but applied only with water which helps lubricate the process. Again, the slurry was removed with a wet vacuum and the floor rinsed with water which is vacuumed off once more. This process is then repeated with a 1500-grit burnishing pad which starts putting the polish back on the floor. These large 17-inch pads can struggle around the edges of the floor so small six-inch burnishing pads fitted to a hand polisher are used. Once the whole floor had been treated in this manner it was rinsed down once more and dried with the wet vacuum before being left to dry out fully overnight.

Sealing a Limestone Tiled Restaurant Floor

The next day the last burnishing pad in the series was run over the floor, this is a very fine 3000-grit pad which completes the polishing process and leaves the Limestone with a healthy shine. This final pad is applied dry with only a few squirts of water applied to the surface, a process we call spray burnishing.

Lastly to protect the floor it was sealed using two coats of Tile Doctor Ultra-Seal which is a premium natural look penetrating and durable sealer. The sealer prevents dirt from becoming trapped in the pores of the stone and allow it to be easily cleaned off the surface. Once the last coat of sealer was dry the floor was dry the floor was buffed with a White buffing pad to improve the sheen and remove any excess sealer.

Limestone Floor After Renovation Chester Restaurant Cheshire

I am pleased to say we didn’t encounter any complications during cleaning, so the timings worked out beautifully and the owner was able to open on schedule.

For future maintenance I recommended the use of Tile Doctor Stone Soap cleaner which is a pH neutral that will gently cleans the tile whilst improving patina. Many commercial tile cleaning products are simply too strong for sealed floors and can degrade the sealer prematurely.

Professional Cleaning of a Limestone Floor in a Cheshire Restaurant

Cleaning a Limestone Floor in a Chester Restaurant Ready for Reopening Read More »